Products

View our ISO 90001/2008 Certficate

General Purpose Thermocouples

Autoclave Load Thermocouple (Type 9A)

The harsh conditions found in the autoclave chambers of sterilisers require a reliable sensor, as all too often sensors can fail and instrumentation be damaged through ingress of moisture. These autoclave load thermocouples offer a reliable solution to the problem.

Available in thermocouple types T or K, they can be supplied as simplex or duplex assemblies and comprise of a stainless steel sensor tip, a length of cable inside a flexible stainless steel conduit, a stainless steel feed-through and then flying leads oversheathed with silicone rubber. An Autoclave Drain Thermocouple is also avaialble.

Enquiry Form

1. Thermocouple Type


2. Sheath Diam. 'd1'


 mm

3. Sheath Length 'L1'


 mm

4. Types of Sensing Junction


Illustration Select
INSULATED Junction
GROUNDED Junction
Duplex Element Required? (please tick box)
Triplex Element Required? (please tick box)

5. Conduit Length 'L2'


 mtrs*

6. Feedthrough Diam. 'd2'


 mm

7. Feedthrough Length 'L3'


 mm

8. Cable Length 'L4'


 mtrs*

9. Optional Compression Fitting


10. Quantity Required


Contact Details


Company Name


Your Name


Email


Telephone


Additional Information


If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  

>
1 Thermocouple Type Temperature Range (continuous) Temperature Range
(short term)
KNickel Chromium vs
Nickel Aluminium
0°C to +1100°C -180°C to +1350°C
T Copper vs Constantan -185°C to +300°C -250°C to +400°C
Temperature ranges refer to the thermocouple type.
The temperature range of the sensor may deviate from the above,
please refer to the product description for more details

INSULATED
Hot junction insulated from sheath. Gives floating output with typical insulation resistance in excess of 100 megohms

GROUNDED
Hot junction welded to sheath tip giving earthed output and faster response to temperature changes