Products

Series PSF and MSF- Split Feedthroughs for single and multiple elements

Pressure and Vacuum Feedthroughs

Series PSF (single element) and MSF (multiple elements) feedthroughs are similar to series MF feedthroughs, but have split internal components.

This permits elements, that have a larger diameter section other than at the sealing point and can pass through the feedthrough body but not through the internal components, to be installed easily. Examples are probes with fitted connectors and sensors with pot seals or bulbs.

There are three body sizes having 1/4”, 1/2” and 3/4” process connections in either BSPT (conical gas or DIN 2999 ‘R’) and NPT threads.

Spectite® feedthroughs are designed for ease of assembly and installation. Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions.
  • Individual elements can be replaced without complete disassembly
  • Internal components – follower, sealant and seat are split to allow easy installation of elements with fitted connectors or large diameter sections.
  • Designed to carry single elements 1.0mm to 12.7mm dia., and multiple elements 1.0mm to 6.35mm dia.
  • Pressure range: Vacuum to 700 bar*
  • Temperature range: <-200°C to +870°C*
  • 316L Body (and seat where applicable). Follower and cap in 303 or 304
  • Choice of sealant materials
  • Immersion length of each element easily adjusted
  • Reusable fitting – internal components replaceable
  • A large range of feedthroughs is available to buy online

    * Dependent on sealant and fitting selected

PSF Series (single slement) Body Size, Pressure Guide and available Bore Sizes for BSPT, BSPP and NPT Threads2

Body Size Size 2 (1/4") Size 3 (1/2") Size 4 (3/4") Size 5 (1")
Sealant
G L N T V G L N T V G L T V G L T V
Element Sizes (dia)3 The maximum guide pressure value (in bar) at 20°C is shown for each sealant material according to element size1.
These ratings are a guide and the suitability of any of the products described herein for a particular application
is entirely at the discretion of the purchaser as being the best judge for that particular application.
inches mm  
0.040 1.0 480 480 300 210 450      
0.059 1.5
0.062 1.59
0.080 2.0 480 610 180 80 180
0.118 3.0 500 670 100 100 100
0.125 3.2
0.157 4.0 260 590 100 50 150
0.177 4.5
0.187 4.76
0.236 6.0 230 500 80 40 120 330 100 130 50 140 50 100 20 100
0.250 6.35
0.312 8.0   70 90 80 60 80 30 40
0.375 9.5 300 500 60 80 30
0.393 10.0 30 50 20 20
0.472 12.0   50
0.500 12.7
0.625 15.88  
0.750 19.05

Series MSF (multi element) Body Size, Pressure Guide and available Bore Sizes for BSPT, BSPP and NPT Threads2

Body Size No. of
Elements
Size 2 (1/4") No. of
Elements
Size 3 (1/2") No. of
Elements
Size 4 (3/4")1 No. of
Elements
Size 5 (1")
Sealant
G L N T V G L N T V G L T V G L T V
Element Sizes (dia) The maximum guide pressure value (in bar) at 20°C is shown for each sealant material according to element size1.
These ratings are a guide and the suitability of any of the products described herein for a particular application
is entirely at the discretion of the purchaser as being the best judge for that particular application.
inches mm
0.040 1.0 2 to 3 400 550 200 200 200 2 to 5 550 550 300 200 350 2 to 9 450 450 250 300  
0.059 1.5 150 150 2 to 4 2 to 7 200
0.062 1.59
0.080 2.0 2 2 to 3 2 to 6
0.118 3.0 100 2 270 150 300 2 to 4 270 5 150 100 80 100
0.125 3.2
0.177 4.5   250 100 200 2 to 3 300 100 200 4 100 55 55 30
0.187 4.76  
0.236 6.0 2 3
0.250 6.35 2
  1. The guide pressures shown for each type of sealant are at 20°C. Spectite® feedthroughs from TC Ltd. have been designed to provide an efficient seal on the elements and restrain them from moving under pressure and vacuum. It is good installation practice to provide additional, mechanical restraint to the elements when differential pressure exceeds 50% of the feedthrough guide pressure value at 20°C. With an increase in temperature, a reduction in the maximum guide pressure value can be expected. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
  2. Other types of process connection are available, see Feedthrough Sizes.
  3. The element diameters shown are the common sizes routinely demanded for general industrial applications. Other sizes can be supplied between the minimum and maximum diameters shown.

Pressure and Vacuum Feedthrough Enquiry Form

1. Feedthrough Type

2. Thread Size Required
  see table
3. Element diameter

 see table
4. No. of Elements (MSF only)
 see table
5. Sealant Type

4. Quantity Required

Contact Details

Company Name


Your Name


Email


Telephone


Additional Information

If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  

BACK TO TOP
Products

Contact Us

About TC

FREE Guide

Privacy Policy

Terms and Conditions

Sitemap
FREE Wallchart Guide

Join over 500,000 engineers and buyers who have already received our FREE 74 page A3 Guide to Thermocouple and Resistance Thermometry

Company Name
  Address 1
Your Name
  Address 2
Title / Dept.
  County / Region / State
Email
  Postcode / ZIP Code
Telephone
  Country
Company Name
Your Name
Title / Dept.
Address 1
Address 2
County / Region / State
Postcode / ZIPCode
Country
Email
Telephone

We will only ever use the information you provide to occasionally contact you regarding our products and we will never disclose your details to a third party. Our privacy policy can be viewed here



I agree to the terms and conditions listed in the Privacy Policy

View our ISO 90001/2008 Certficate
View our ISO 90001/2008 Certficate




Thermocouple Sensors
Mineral Insulated Thermocouples
Thermocouples with Mini Plug
Thermocouples with Terminal Head
Thermocouples with Cable
High Temperature Thermocouples
General Purpose Thermocouples
IECEx/ATEX Thermocouple Sensors
Ceramic Thermocouple Sensors
Fast Response Thermocouple Sensors
Autoclave Thermocouple Sensors
Surface Measurement Thermocouple Sensors
FEP Insulated Thermocouple

Platinum Resistance Thermometers
Mineral Insulated RTD Pt100 Sensors
Rigid Stem RTD Pt100 Sensors
Hand Held RTD Pt100 Sensors
Surface Measurement RTD Pt100 Sensors
RTD Pt100 Sensors with Cable
RTD Pt100 Sensors with Mini Plug
Autoclave RTD Pt100 Sensors
RTD Pt100 with Terminal Head
IECEx/ATEX Platinum Resistance Thermometers
Fast Response RTD Pt100 Sensors
Air Temperature RTD Pt100 Sensors
Magnetic RTD Pt100 Sensors
Cable
PVC Single Pair Thermocouple Cable
PFA Single Pair Thermocouple Cable
Fibreglass Single Pair Thermocouple Cable
PVC Multipair Thermocouple Cable
PFA Multipair Thermocouple Cable
Fibreglass Multipair Thermocouple Cable
PVC RTD Pt100 Cable
PFA RTD Pt100 Cable
Fibreglass RTD Pt100 Cable

Miniature Thermocouple Connectors
Mini Thermocouple Connectors – 220ºC Rated
Mini Thermocouple Connectors – 350ºC Rated
Mini Thermocouple Connectors – 650ºC Rated
Mini Thermocouple Connector Accessories
Mini Thermocouple Connector Panels
Mini Three Pin Connectors

Standard Thermocouple Connectors
Standard Thermocouple Connectors – 220ºC
Standard Thermocouple Connectors – 350ºC Rated
Standard Thermocouple Connectors – 650ºC Rated
Standard Thermocouple Connector Accessories
Standard Thermocouple Connector Panels
Standard Three Pin Connectors
Instrumentation
Hand Held Indicators
Panel Indicators
Temperature Transmitters
Temperature Controllers
Temperature Calibrators
Chart Recorders
Multi Channel Indicator
DIN Rail Mounted Transmitters
Head Mounted Transmitters
IECEx/ATEX Rated Transmitters
Dry Block Calibrator
Temperature Dataloggers

Temperature Accessories
Compression Fittings
Pressure and Vacuum Feedthroughs
IECEx/ATEX Compression Fittings

Calibration
Calibration Services

Pressure
Pressure Gauges
Pressure Transmitters


© 1998- TC Measurement & Control Pty Ltd, PO Box 7777, Oakleigh, VIC 3166, Australia
Tel.: 03 9543 8433, Fax: 03 9543 8466, Email: info@tcaus.com.au